SPOD Series, Remote & Self-Contained, Open Display Spot Merchandisers

Features :

  1. Decorator colored sides of your choice from Marc's enormous inventory
  2. Energy saving Night Shades lock in your refrigeration overnight
  3. Freon valve installed on remote and self-contained models
  4. Dial thermoeter for accurate temperature readings
  5. Enhanced product lighting from top canopy
  6. Stainless steel main deck, with stainless steel step up
  7. Drain is 1" pipe thread - for easy cleaning (drain connection required in field, on remote models)
  8. Front bumber - made of high density PVC for shopping cart impact
  9. A separate 115/60/1 15 AMP circuit is required for condensate evaporator
  10. Case temperature will vary if the air curtain is disrupted
  11. The rear of the unit needs to be 6" from a wall
  12. Refrigerated cases are designed to operate in an environment of 75° Fambient and 55% relative humidity
  13. Due to continuing engineering improvements, specifications are subject to change without notice
  14. Side panels have 3/8" plexiglass for maximum visibility and safety
  15. Insulation is full density, solid core urethane
  16. Automatic time clocks are standard for self-contained models
  17. Mirror finish stainless steel trim, caps, moulding, main deck and shelves
Download Catalog
Marc's SPOD Series Open Dairy Merchandisers
MODEL LENGTH HEIGHT DEPTH Unit Installed Unit recommended
(not included)
Minimum circuit
ampacity electrical data
Approx.
Shipping Weight
SPOD-6R 72 1/2" 43 1/2" 34 1/2" x 1 H.P * 115/1/60 - 4 amps 700 lbs.
SPOD-8R 94 1/2" 43 1/2" 34 1/2" x 1 H.P * 115/1/60 - 6 amps 800 lbs.
SPOD-10R 116 1/2" 43 1/2" 34 1/2" x 1 1/2 H.P. * 115/1/60 - 6 amps 1000 lbs.
SPOD-12R 138 1/2" 43 1/2" 34 1/2" x 2 H.P * 115/1/60 - 6 amps 1140 lbs.
SPOD-4S/C 49" 43 1/2" 34 1/2" plus 3"
removeable wall spacer for compressor air flow
1 1/2H.P. x 115/1/60 15 amps
lights & fans
unit & clock
*A separate 115/60/1
15 AMP circuit is required
for condensate evaporator
675 lbs.
SPOD-6S/C 72 1/2" 43 1/2" 34 1/2" plus 3"
removeable wall spacer for compressor air flow
3/4 H.P. x 115/1/60 17 amps
lights & fans
unit & clock
*A separate 115/60/1
15 AMP circuit is required
for condensate evaporator
775 lbs.

NOTE: Designed for use in locations with air conditioning where temperature and relative humidity do not exceed 75° F Ambient and 55% RH. (Excessive condensation & loss of temperature may occur).

(*) This size condenser unit is RECOMMENDED for this model. Consult a competent refrigeration mechanic to determine the appropriate size for your specific application. The appropriate condenser will vary depending on length of run, indoor/outdoor use, etc. Do not install near heat, A/C Air ducts, A/C thermostats or doorways.